Home Comfort

Prevent Water Damage In Your Bathroom with These Tips

Gideon Anderson

Bathrooms are among the most frequent areas to suffer from repeated water abuse and have a high risk for water damage, but damage and the cost can be cut with a couple of easy steps on how best to take care of water damage.

The very first thing should be obvious is to come across the water shut off valve and then turn it off to prevent additional damage if you’re suffering broken pipes.  If that’s the origin of the escape, otherwise, there ought to be a handle behind the bathroom, you will need to find the valve for the house.  Taking away the water is something you’ll have to address before mold can place in; bucket, towels, even a shovel, and store vacs are helpful if the water is excessive.

More thorough drying is required after water is removed by stripping the walls, paneling, and fixtures.  Mold is a risk so it is important to do this as quickly and thoroughly as possible and finish turning on fans, ventilating by opening windows as possible and getting as much airflow in the region.  While awaiting the area you may use the opportunity.

If there’s any debris or dirt after the region’s dry, make sure you use one-time-use rags, industrial bags, gloves and gloves to wash before sanitizing.  When the debris is eliminated, make certain that you have proper ventilation within the room and use a combination of water and bleach to go over every surface (floors, walls, ceiling, and fixtures) to completely sanitize.  After fumes are gone, you will thoroughly clean out the toilet and go through the room with particular care to whatever and any wood touching the floor.  When you have some questions about mold growing or begin to see signs, immediately telephone a water damage expert to check the area after you have finished so you can also keep on preventing water damage in winter.

How To Prevent Water Damage In Bathrooms

The regular use of water from the bathroom makes it extremely vulnerable for moist accumulation and potential water damage.  By inspecting it regularly, you can reduce water-related damages.

Bathtub and Shower

The shower and bathtub require particular care and upkeep.  Check the tiles and replace if cracked.  Make sure there is not any missing grout between the tiles.  Inspect and replace caulking at joints where the walls meet the bathtub or the floor.  Clogged drains and pipes issues will prevent the bathtub from drying and may signal serious issues beneath the tub.  Talk to a professional promptly to prevent structural damage.  Because they might indicate an inner flow, Look closely at regions around the bathtub walls or discolorations.


Signs for water damage are hard to find since most pipes are installed within the walls.

Pay special focus on walls and flooring moisture and stains because they might indicate an invisible plumbing problem.  Check humidity levels in adjoining rooms.

Sinks and Carpets 

Sinks and cabinets are exposed to humidity and moisture daily and are often overlooked.  Inspect regularly under the sink and on the countertop above it.  Repair any drip in the trap as it might suggest drain problems.  Look round the sink pipes can indicate a drain that is blocked.  Replace sink seals if they’re loose or cracked.

The Toilet

The toilet is a vulnerable water junction.  Check the water lines and hunt for leaks around the toilet seat, in the hose, and beneath the water tank.  If you detect any signs of moisture check for leaks in the toilet rim and tank seals.

Be aware that hanging toilet bowl deodorants increase the likelihood of clogs. Visit the PuroClean website to know the 10 ways to prevent water damage in your bathroom.

Cleaning Up The Bathroom 

1.  Assess Damage

Before beginning any cleaning, you first need to switch off the water.  Following that, you can assess the damage and see if it is even doable.  In case the issue is done to a toilet and didn’t soak the carpet in the hall, you are probably fine to do it on your own.  But in the event, the damage occurred when you were off and has already soaked the carpet (that will then need to be pulled up), floor and walls you might choose to call at a water damage expert.  Whatever you decide, do it quickly because you do not need that water.

2.  Wear Protective Gear

In case you decide you can do this all on your own, protect yourself with appropriate sewage cleaning attire.  Sewage water is not safe and poisonous to consume or touch.  You are going to want a mask, goggles, thick and long gloves, waterproof boots, protective coat or clothes, and your hair up if it’s long.  It is worth it, although you may appear ridiculous.

3.  Throw out Textiles

Any carpets, towels, or clothes which were severely influenced by the water have to get thrown out.  Stains may care for possibility, but any materials that were drenched shouldn’t be discarded.  You can set it in a garbage bag and try taking it if a specific item is important to you.

4.  Get Water Out

First things first, get that water out.  Rent or borrow a shop vac in case you don’t have you to take care of the work quickly and easily.  You might need to just mop it if this is not feasible.  Dispose of all water safely and properly, and be certain after using it to thoroughly disinfect your mop.

5.  Disinfect and sterile 

Make a disinfecting agent using a high-quality cleaner in the store.  If mixed correctly you can even use water and bleach.  Follow the directions on the bottle per-diem rather than mix chemicals without knowledge that it is safe to do so.  Once you’ve disinfected the floor, bottom of walls and whatever let it dry.  Then return in just a bit and discuss it all once again.

6.  Dry and Ventilate

Put to the bathroom fan and open some windows to let the area dry correctly.  It is important to exfoliate fully to prevent mold or structural damage to any kind.  If you’re not positive if the walls protruded, you might choose to call a mold expert out to check to make sure.

7.  End Up

Throw away all rags used to clean in thick industrial trash bags along with any other supplies or items used to clean the da